Replacing license plate lamp bulbs
1. Make sure the headlamp switch is in the off position.
2. Remove the two screws and the
license plate lamp assembly from the
liftgate.
3. Carefully pull the bulb straight out
from the lamp assembly.
Install new bulb(s) in reverse order.
BULB SPECIFICATION CHART
Replacement bulbs are specified in the chart below. Headlamp bulbs
must be marked with an authorized “D.O.T.” for North America and an
“E” for Europe to ensure lamp performance, light brightness and pattern
and safe visibility. The correct bulbs will not damage the lamp assembly
or void the lamp assembly warranty and will provide quality bulb burn
time.
Function
Number of Bulbs
Trade
Number
*Headlamp
2
D3S (HID)
*Front sidemarker lamp
N/A
LED
*Front parking lamp
N/A
LED
*Front turn lamp
2
PY24W SV+
Fog lamp
2
H11
*Tail/brake/turn signal
lamp
N/A
LED
*Rear sidemarker
N/A
LED
*Backup lamp
N/A
LED
License plate lamp
2
C5WL
*High-mount brake lamp
N/A
LED
*First row dome/map lamp
2
1600XB
Maintenance
315
2015 MKT
(mkt)
Owners Guide gf, 1st Printing, October 2014
USA
(fus)