ADJUSTING THE STEERING WHEEL
WARNING:
Do not adjust the steering wheel when your vehicle
is moving.
Note:
Make sure that you are sitting in the correct position. Refer to
Sitting in the Correct Position
in the
Seats
chapter.
Use the control on the side of the
steering column to adjust the
position.
To adjust:
•
tilt: press the top or bottom of the
control
•
telescope: press the front or rear
of the control.
Easy Entry and Exit Feature
When you switch the ignition off, the steering column will move to the
full up and forward position to allow extra room to exit your vehicle. The
column will return to the previous setting when you switch the ignition
on. You can enable or disable this feature in the information display. See
General Information
in the
Information Displays
chapter.
Memory Feature
The steering column position saves when you do a memory set function.
You can recall it with the memory feature. Refer to the
Seats
chapter.
Pressing the adjustment control during memory recall will cancel the
operation. The column will respond to the adjustment control.
The steering column sets a stopping position just short of the end of the
column position to prevent damage to the steering column. A new
stopping position will be set if the steering column encounters an object
while tilting or telescoping.
86
Steering Wheel
2015 MKT
(mkt)
Owners Guide gf, 1st Printing, October 2014
USA
(fus)
