manualshive.com logo in svg

Lincoln 2009 MKZ, Owner'S Manual

The Lincoln 2009 MKZ Owner's Manual is an essential guide for any MKZ owner. This comprehensive manual provides detailed information about the vehicle's features, maintenance, and safety guidelines. Download this manual for free from our website to ensure a seamless driving experience with your MKZ.

Share
Download
background image

3. Put the jack in the jack locator
next to the tire you are changing.
Turn the jack handle clockwise until
the wheel is completely off the
ground.

Note

: To avoid structural damage to

the vehicle, ensure that the jack is
centered between the two markings
(1) on the bottom of the rocker
flange.

WARNING:

To lessen the

risk of personal injury, do

not put any part of your body
under the vehicle while changing a
tire. Do not start the engine when
your vehicle is on the jack. The
jack is only meant for changing
the tire.

4. Remove the lug nuts with the lug wrench.

5. Replace the flat tire with the spare tire, making sure the valve stem is
facing outward. Reinstall lug nuts until the wheel is snug against the hub.
Do not fully tighten the lug nuts until the wheel has been lowered.

If you are using the temporary tire, the lug nut washers will not appear
to be flush with the rim. This is normal only when using the temporary
spare tire.

6. Lower the wheel by turning the jack handle counterclockwise.

2009 MKZ

(378)

Owners Guide, 2nd Printing
USA

(fus)

Roadside Emergencies

224

Summary of Contents for 2009 MKZ






































































































































































































































































































Reviews:

No comments

Related manuals for 2009 MKZ

Ecco Gemineye EC2014-C Installation Instructions Manual preview
Gemineye EC2014-C
Brand: Ecco Pages: 10
Ecco Reflex 5500 Series Installation And Operating Instructions Manual preview
Reflex 5500 Series
Brand: Ecco Pages: 12
Yamaha Yamaha Rhino 660 Instruction Supplement preview
Yamaha Rhino 660
Brand: Yamaha Pages: 3
muth signal mirror 2005-2009 Ford Mustang Installation Instruction preview
signal mirror 2005-2009 Ford Mustang
Brand: muth Pages: 9
Hummer 2006 H2 Owner'S Manual preview
2006 H2
Brand: Hummer Pages: 502
Porsche 01-B Web Application Manual preview
01-B
Brand: Porsche Pages: 313
Yakima K614 Manual preview
K614
Brand: Yakima Pages: 12
FALCON RIDGE CF-1000-WD05 Instructions For Installation And Care preview
CF-1000-WD05
Brand: FALCON RIDGE Pages: 6
Mobility Networks RPH 35.13 Use And Maintenance Manual preview
RPH 35.13
Brand: Mobility Networks Pages: 52
Audi 2011 A3 Sportback Pricing And Specification Manual preview
2011 A3 Sportback
Brand: Audi Pages: 29
cam PFF Series Operating Manual preview
PFF Series
Brand: cam Pages: 28
Calix group TYP MVP 823 Assembly Instructions preview
TYP MVP 823
Brand: Calix group Pages: 4
Roadmaster 195125 Assembly And Operating Instructions preview
195125
Brand: Roadmaster Pages: 4
TracRac TracONE Installation Instructions Manual preview
TracONE
Brand: TracRac Pages: 8
Dodge Charger SRT 392 2017 Operating Information Manual preview
Charger SRT 392 2017
Brand: Dodge Pages: 576
Lexus LS 500h 2022 Owner'S Manual, Quick Manual preview
LS 500h 2022
Brand: Lexus Pages: 108
TracRac TracVan Double Installation Instructions Manual preview
TracVan Double
Brand: TracRac Pages: 6
Wald Black Bison Sports Series Installation Manual preview
Black Bison Sports Series
Brand: Wald Pages: 7

Brands by name

Popular brands

Load more brands