Lincoln 2009 MKZ Owner'S Manual Download Page 78

Page: 78 / 293

Units (English/Metric)

1. Select this function from the
SETUP menu for the current units
to be displayed.

2. Press the RESET control to
change from English to Metric.

Language

1. Select this function from the
SETUP menu for the current
language to be displayed.

2. Pressing the RESET control
cycles the message center through
each of the language choices.

3. Press and hold the RESET
control to set the language choice.

Easy entry/exit seat

This feature automatically moves the drivers seat backwards for easy exit
from the vehicle.

1. To disable/enable the easy exit
seat feature, select this function
from the SETUP control for the
current display mode.

2. Press the RESET control to turn
the easy entry exit seat ON or OFF.

Reverse Sensing System (Park aid)

This feature sounds a warning tone to warn the driver of obstacles near
the rear bumper, and functions only when R (Reverse) gear is selected.

2009 MKZ

(378)

Owners Guide, 2nd Printing
USA

(fus)

Driver Controls

Summary of Contents for 2009 MKZ






































































































































































































































































































Search results

Summary of Contents for 2009 MKZ

Reviews:

Related manuals for 2009 MKZ

Brands by name

Popular brands

Lincoln 2009 MKZ, Owner'S Manual

Search results

Summary of Contents for 2009 MKZ

Reviews:

Related manuals for 2009 MKZ

Brands by name

Popular brands