manualshive.com logo in svg

Lincoln 2009 MKZ, Owner'S Manual

The Lincoln 2009 MKZ Owner's Manual is an essential guide for any MKZ owner. This comprehensive manual provides detailed information about the vehicle's features, maintenance, and safety guidelines. Download this manual for free from our website to ensure a seamless driving experience with your MKZ.

Share
Download
background image

•

Add Motorcraft Premium Gold Engine Coolant or equivalent
meeting Ford specification WSS-M97B51-A1.

Refer to

Maintenance product specifications and capacities

in this chapter.

Note:

Use of Motorcraft Cooling System Stop Leak Pellets or an

equivalent product meeting Ford specification WSS-M99B37-B6, may
darken the color of Motorcraft Premium Gold Engine Coolant from
yellow to golden tan.

•

Do not add/mix an orange-colored, extended life coolant such
as Motorcraft Specialty Orange Engine Coolant, meeting Ford
specification WSS-M97B44-D, or DEX-COOL

威

brand with the

factory-filled coolant.

Mixing Motorcraft Specialty Orange Engine

Coolant or any orange-colored extended life product such as
DEX-COOL

威

brand with your factory filled coolant can result in

degraded corrosion protection.

•

A large amount of water without engine coolant may be added, in case
of emergency, to reach a vehicle service location. In this instance, the
cooling system must be drained and refilled with a 50/50 mixture of
engine coolant and distilled water as soon as possible. Water alone
(without engine coolant) can cause engine damage from corrosion,
overheating or freezing.

•

Do not use alcohol, methanol, brine or any engine coolants
mixed with alcohol or methanol antifreeze (coolant).

Alcohol

and other liquids can cause engine damage from overheating or
freezing.

•

Do not add extra inhibitors or additives to the coolant.

These

can be harmful and compromise the corrosion protection of the engine
coolant.

WARNING:

To reduce the risk of personal injury, make sure the

engine is cool before unscrewing the coolant pressure relief cap.

The cooling system is under pressure; steam and hot liquid can come
out forcefully when the cap is loosened slightly.

Note: The process stated below should only be used when the
coolant level is low and additional coolant is needed. If the
coolant system has been drained in any way, you must refer to
the Cooling section of the Workshop Manual.

1. Before you begin, turn the engine off and let it cool.

2. When the engine is cool, wrap a thick cloth around the coolant
pressure relief cap on the coolant reservoir (an opaque plastic bottle).
Slowly turn cap counterclockwise (left) until pressure begins to release.

2009 MKZ

(378)

Owners Guide, 2nd Printing
USA

(fus)

Maintenance and Specifications

260

Summary of Contents for 2009 MKZ






































































































































































































































































































Reviews:

No comments

Related manuals for 2009 MKZ

Ironton 44596 Owner'S Manual preview
44596
Brand: Ironton Pages: 7
Phonocar 4/084 Mounting Instructions preview
4/084
Brand: Phonocar Pages: 2
BendPak Autostacker PL-6SR Installation And Operation Manual preview
Autostacker PL-6SR
Brand: BendPak Pages: 104
ULTIMATE SPEED 279746 Assembly And Safety Advice preview
279746
Brand: ULTIMATE SPEED Pages: 6
Pyle PLDCP3 User Manual preview
PLDCP3
Brand: Pyle Pages: 2
Cadillac 2003 Seville Owner'S Manual preview
2003 Seville
Brand: Cadillac Pages: 402
Cobra BAK R294 Manual preview
BAK R294
Brand: Cobra Pages: 2
Omix-Ada Alloy Rugged Ridge X-Clamp Manual preview
Alloy Rugged Ridge X-Clamp
Brand: Omix-Ada Pages: 2
Dodge 8W-70 Wiring Diagram preview
8W-70
Brand: Dodge Pages: 3
Honda 2006 Accord Owner'S Manual preview
2006 Accord
Brand: Honda Pages: 569
Toyota Solara guide Owner'S Manual preview
Solara guide
Brand: Toyota Pages: 497
Dometic LMC Eriba Nova Service Manual preview
LMC Eriba Nova
Brand: Dometic Pages: 24
Ford F-250 Super Duty 2022 Owner'S Manual preview
F-250 Super Duty 2022
Brand: Ford Pages: 740
Edelbrock 460 Ford Installation Instructions preview
460 Ford
Brand: Edelbrock Pages: 2
Xpresskit PKTX Installation Manual preview
PKTX
Brand: Xpresskit Pages: 12
Edelbrock Performer-Plus 2172 Installation Instructions preview
Performer-Plus 2172
Brand: Edelbrock Pages: 4
MMD 41240 Quick Manual preview
41240
Brand: MMD Pages: 3
Cadillac 2011 Cadillac Owner Assistance Information preview
2011 Cadillac
Brand: Cadillac Pages: 48

Brands by name

Popular brands

Load more brands