manualshive.com logo in svg

Lincoln 2009 MKZ, Owner'S Manual

The Lincoln 2009 MKZ Owner's Manual is an essential guide for any MKZ owner. This comprehensive manual provides detailed information about the vehicle's features, maintenance, and safety guidelines. Download this manual for free from our website to ensure a seamless driving experience with your MKZ.

Share
Download
background image

This mode should be used

any time

a child safety seat, except a

booster, is installed in passenger front or rear seating positions. Children
12 years old and under should be properly restrained in a rear seating
position whenever possible. Refer to

Safety restraints for children

or

Safety seats for children

later in this chapter.

How to disengage the automatic locking mode

WARNING:

Ford Motor Company recommends that all

passenger safety belt assemblies and attaching hardware should

be inspected by an authorized dealer after any collision to verify that
the

⬙

automatic locking retractor

⬙

feature for child seats is still working

properly. Safety belt assemblies should be inspected by an authorized
dealer and must be replaced if either damage or improper operation is
noted. Failure to replace the belt and retractor assembly could
increase the risk of injury in a collision.

Unbuckle the combination lap/shoulder belt and allow it to retract
completely to disengage the automatic locking mode and activate the
vehicle sensitive (emergency) locking mode.

Safety belt pretensioner

Your vehicle is equipped with safety belt pretensioners at the driver and
front outboard passenger seating positions.

The safety belt pretensioner tightens the safety belts firmly against the
occupant’s body at the start of the crash.

WARNING:

The driver and front passenger safety belt system

(including retractors, buckles and height adjusters) must be

replaced if the vehicle is involved in a collision that results in
deployment of front airbags, seat-mounted side airbags and side air
curtains, and safety belt pretensioners.

2009 MKZ

(378)

Owners Guide, 2nd Printing
USA

(fus)

Seating and Safety Restraints

120

Summary of Contents for 2009 MKZ






































































































































































































































































































Reviews:

No comments

Related manuals for 2009 MKZ

GARO TWIN+ Assembly Instructions / End User Instruction preview
TWIN+
Brand: GARO Pages: 23
GARO LS4 Wallmounted Operational Instructions preview
LS4 Wallmounted
Brand: GARO Pages: 15
Kargo Master 40131 Installation Manual preview
40131
Brand: Kargo Master Pages: 5
Front Runner Easy-Out Fitting Instructions preview
Easy-Out
Brand: Front Runner Pages: 5
Chariot Carriers 51100913 Instruction Manual preview
51100913
Brand: Chariot Carriers Pages: 3
Whispbar K728W Fitting Instructions Manual preview
K728W
Brand: Whispbar Pages: 85
Whispbar K678W Fitting Instructions Manual preview
K678W
Brand: Whispbar Pages: 14
Jeep Cherokee 1977 Owner'S Manual preview
Cherokee 1977
Brand: Jeep Pages: 136
Racelogic Speed & Route Profiler Manual preview
Speed & Route Profiler
Brand: Racelogic Pages: 24
GReddy 12519101 Instruction Manual preview
12519101
Brand: GReddy Pages: 12
AL-KO AKS 1300 Operating Instructions Manual preview
AKS 1300
Brand: AL-KO Pages: 40
Prorack K374 Manual preview
K374
Brand: Prorack Pages: 14
Bilstein E4-WM5-Y479A00 Mounting Instruction preview
E4-WM5-Y479A00
Brand: Bilstein Pages: 7
TracRac TracONE Installation Instructions Manual preview
TracONE
Brand: TracRac Pages: 8
Acura 08L03-TA1-200A Installation Instructions preview
08L03-TA1-200A
Brand: Acura Pages: 4
Acura 2011 RDX Navigation System Advanced Technology Manual preview
2011 RDX Navigation System
Brand: Acura Pages: 16
EUFAB 16559 Operating Instructions Manual preview
16559
Brand: EUFAB Pages: 12
Gentex Full Display Mirror Installation Instructions Manual preview
Full Display Mirror
Brand: Gentex Pages: 18

Brands by name

Popular brands

Load more brands