manualshive.com logo in svg

Lincoln 2007 MKX, Owner'S Manual

The Lincoln 2007 MKX Quick Reference Manual is a comprehensive guide that provides detailed instructions on operating and maintaining the luxurious MKX model. With a focus on quick and easy access, this manual is available for free download on our website, ensuring a hassle-free experience for all MKX owners.

Share
Download
background image

Removing the spare tire and jack

1. Lift the carpeted load floor panel
located in the rear of the vehicle.

2. Remove the wing nut securing
the spare tire by turning it
counterclockwise.

3. Lift and remove the spare tire.

4. Remove the spacer and bag
containing the jack assembly.

5. Remove the jack and wrench
from the bag. Fold down the wrench
socket to use to loosen the lug nuts
and operate the jack.

Tire change procedure

When one of the front wheels is off the ground, the transaxle
alone will not prevent the vehicle from moving or slipping off the

jack, even if the vehicle is in P (Park).

To help prevent the vehicle from moving when you change a tire,
be sure to place the transaxle in P (Park), set the parking brake

and block (in both directions) the wheel that is diagonally opposite
(other side and end of the vehicle) to the tire being changed.

If the vehicle slips off the jack, you or someone else could be
seriously injured.

2007 MKX

(mkx)

Owners Guide (post-2002-fmt)
USA

(fus)

Roadside Emergencies

248

Summary of Contents for 2007 MKX

































































































































































































































































































































Reviews:

No comments

Related manuals for 2007 MKX

Porsche 911 GT3 - Owner'S Manual preview
911 GT3 -
Brand: Porsche Pages: 195
CARRYBOY CB-796IG2-CIGD-R Installation Manual preview
CB-796IG2-CIGD-R
Brand: CARRYBOY Pages: 4
GMC 2012 Terrain Owner'S Manual preview
2012 Terrain
Brand: GMC Pages: 428
Kuda 182220 Installation Instruction preview
182220
Brand: Kuda Pages: 3
Honda Pilot 2019 Owner'S Manual preview
Pilot 2019
Brand: Honda Pages: 85
Safe Fleet inView 360 Fusion Calibration Manual preview
inView 360 Fusion
Brand: Safe Fleet Pages: 27
Seat ROADSIDE ASSISTANCE Handbook preview
ROADSIDE ASSISTANCE
Brand: Seat Pages: 44
Metra Electronics 99-7860 Installation Instructions preview
99-7860
Brand: Metra Electronics Pages: 5
Renkforce RF-4743771 Operating Instructions preview
RF-4743771
Brand: Renkforce Pages: 4
LXE Akerstroms Tx700 Configuration Manual preview
Akerstroms Tx700
Brand: LXE Pages: 146
Mazda 0000-8L-G03A Installation Instructions preview
0000-8L-G03A
Brand: Mazda Pages: 3
Whispbar K835W Fitting Instructions For Basic Carrier preview
K835W
Brand: Whispbar Pages: 63
Safe Fleet PRIME DESIGN HRR3-E-PM42 Manual preview
PRIME DESIGN HRR3-E-PM42
Brand: Safe Fleet Pages: 12
N.R. AUTOSEATS Top User Manual preview
Top
Brand: N.R. AUTOSEATS Pages: 8
Nos 05183NOS Owner'S Manual preview
05183NOS
Brand: Nos Pages: 22
MacNeil Pet Barrier Instruction Manual preview
Pet Barrier
Brand: MacNeil Pages: 2
Kargo Master 48132 Instruction Manual preview
48132
Brand: Kargo Master Pages: 9
AUTOTECH 10.109.405K Installation Instructions preview
10.109.405K
Brand: AUTOTECH Pages: 2

Brands by name

Popular brands

Load more brands