manualshive.com logo in svg

Lincoln 2007 MKX, Owner'S Manual

The Lincoln 2007 MKX Quick Reference Manual is a comprehensive guide that provides detailed instructions on operating and maintaining the luxurious MKX model. With a focus on quick and easy access, this manual is available for free download on our website, ensuring a hassle-free experience for all MKX owners.

Share
Download
background image

Trailer tow connector (equipped on vehicles with a Class II trailer
tow/prep package)

The trailer tow connector is located under the rear bumper, on the
driver’s side of the vehicle.

Refer to the following chart for information regarding the
factory-equipped trailer tow connector:

Trailer tow connector

Color

Function

1. Dark Green

Right hand turn signal/brake/hazard
flasher

2. Yellow

Left hand turn signal/brake/hazard
flasher

3. Brown

Tail lamps/parking lamps

4. White

Ground

Driving while you tow

When towing a trailer:

•

Keep your speed no faster than 70 mph (112 km/h) during the first
500 miles (800 km) of towing a trailer, and don’t make full throttle
starts.

•

Turn off the speed control. The speed control may shut off
automatically when you are towing on long, steep grades.

•

Consult your local motor vehicle speed regulations for towing a trailer.

•

To eliminate excessive shifting, use a lower gear. This will also assist
in transmission cooling. (For additional information, refer to the

Understanding the positions of the 6–speed automatic
transmission

section in this chapter.

•

Anticipate stops and brake gradually.

•

Do not exceed the GCWR rating or transmission damage may occur.

Servicing after towing

If you tow a trailer for long distances, your vehicle will require more
frequent service intervals. Refer to your

Scheduled Maintenance Guide

for more information.

2007 MKX

(mkx)

Owners Guide (post-2002-fmt)
USA

(fus)

Tires, Wheels and Loading

211

Summary of Contents for 2007 MKX

































































































































































































































































































































Reviews:

No comments

Related manuals for 2007 MKX

Metra Electronics 99-3030B Installation Instructions Manual preview
99-3030B
Brand: Metra Electronics Pages: 12
Halfords Exodus 360 Fitting Instructions preview
Exodus 360
Brand: Halfords Pages: 4
Paxton Automotive Novi Owner'S Installation Manual preview
Novi
Brand: Paxton Automotive Pages: 85
Thule 1489 Instructions Manual preview
1489
Brand: Thule Pages: 8
Porsche 911 GT3 - Owner'S Manual preview
911 GT3 -
Brand: Porsche Pages: 195
Globalsat MR-350P Installation Manual preview
MR-350P
Brand: Globalsat Pages: 2
Opel 2011 Insignia Owner'S Manual preview
2011 Insignia
Brand: Opel Pages: 254
Whispbar K607W Fitting Instructions Manual preview
K607W
Brand: Whispbar Pages: 14
Icom RMK-5 Instruction Manual preview
RMK-5
Brand: Icom Pages: 20
Great Wall WEY VV5 Service Manual preview
WEY VV5
Brand: Great Wall Pages: 18
WIX WP9378 Installation Instruction preview
WP9378
Brand: WIX Pages: 2
Jeep CHEROKEE 2017 User Manual preview
CHEROKEE 2017
Brand: Jeep Pages: 374
Ford Focus 2008 Quick Reference Manual preview
Focus 2008
Brand: Ford Pages: 2
FVC Sprinter Bed System DIY Installation Manual preview
Sprinter Bed System DIY
Brand: FVC Pages: 8
Curt Group 60638 Installation Manual preview
60638
Brand: Curt Group Pages: 3
Juna JRDAB-03 Installation Manual preview
JRDAB-03
Brand: Juna Pages: 10
Buick 1995 Roadmaster Manual preview
1995 Roadmaster
Brand: Buick Pages: 340
Coulomb Technologies ChargePoint CT500-DSTAND Installation Manual preview
ChargePoint CT500-DSTAND
Brand: Coulomb Technologies Pages: 26

Brands by name

Popular brands

Load more brands