Lincoln 2007 MKX Owner'S Manual Download Page 99

Page: 99 / 320

Easy entry/exit (if equipped)

This feature automatically moves the drivers seat backwards for easy exit
from the vehicle.

1. To disable/enable the easy
entry/exit seat feature, select this
function from the SETUP control for
the current display mode.

2. Press the RESET control to turn
the easy entry/exit seat ON or OFF.

Power Liftgate (if equipped)

This feature allows users to open/close the rear liftgate at the touch of a
button.

1. To disable/enable the power
liftgate feature, select this function
from the SETUP control for the
current display mode.

2. Press the RESET control to turn
the power liftgate ON or OFF.

Reverse Sensing System (Park assist) (if equipped)

This feature sounds a warning tone to warn the driver of obstacles near
the rear bumper, and functions only when R (Reverse) gear is selected.

1. Select this function from the
SETUP menu to disable the reverse
sensing system feature.

2. Press the RESET control to turn
the rear park assist OFF. When R
(Reverse) gear is selected, PARK ASSIST OFF will be displayed.

Language

1. Select this function from the
SETUP menu for the current
language to be displayed.

2007 MKX

(mkx)

Owners Guide (post-2002-fmt)
USA

(fus)

Driver Controls

Summary of Contents for 2007 MKX

































































































































































































































































































































Search results

Summary of Contents for 2007 MKX

Reviews:

Related manuals for 2007 MKX

Brands by name

Popular brands

Lincoln 2007 MKX, Owner'S Manual

Search results

Summary of Contents for 2007 MKX

Reviews:

Related manuals for 2007 MKX

Brands by name

Popular brands