Lincoln 2007 MKX Owner'S Manual Download Page 19

Page: 19 / 320

Speed sensitive volume:

Radio volume automatically changes slightly

with vehicle speed to compensate for road and wind noise. Use

to adjust. Recommended level is 1–3. Level 7 is the maximum setting.

Occupancy mode (if equipped):

Use

to select and optimize

sound for ALL SEATS, DRIVERS SEAT or REAR SEATS.

Compression:

Available in CD mode, this feature brings soft and loud

CD passages together for a more consistent listening level. Press MENU
until compression status is displayed. Press

to turn the feature

on/off.

Select:

These controls are used

in Menu mode to select various
settings/options.

Play/Pause/Mute: In radio

mode,

press to mute the playing

media. AUDIO MUTE will appear in
the display. Press again to return to the playing media.

In CD/MP3 mode,

press to pause the playing media. CDX PAUSE will

appear in the display. Press again to return to the playing media.

SEEK

In radio or CD/MP3

mode,

press to access the next

strong station or track.

In satellite radio mode (if equipped)

, press SEEK

to seek to the

next channel. If a specific category is selected, (Jazz, Rock, News, etc.),
press SEEK

to seek to the next channel in the selected category.

Press and hold SEEK

to fast seek through the next channels.

In TEXT MODE,

press SEEK

to view the additional display text

when “>” is active in the display.

In CATEGORY MODE,

press

to select a category.

Satellite radio is available only with a valid SIRIUS subscription.
Check with your authorized dealer for availability.

FWD (Fast Forward):

Press

FWD to manually advance in a
CD/MP3 track.

2007 MKX

(mkx)

Owners Guide (post-2002-fmt)
USA

(fus)

Entertainment Systems

Summary of Contents for 2007 MKX

































































































































































































































































































































Search results

Summary of Contents for 2007 MKX

Reviews:

Related manuals for 2007 MKX

Brands by name

Popular brands

Lincoln 2007 MKX, Owner'S Manual

Search results

Summary of Contents for 2007 MKX

Reviews:

Related manuals for 2007 MKX

Brands by name

Popular brands