Lincoln 2003 Navigator LS Owner'S Manual Download Page 81

Page: 81 / 344

Listing areas to avoid

You can list all areas noted as
“avoid”.

•

Press “Nav Menu”.

•

Press “Stored locations”.

•

Press “Avoid area”.

•

Press LIST to view all previously
stored selections.

•

Select the desired one. The map
screen will be displayed, showing
the location and address of the selected area.

Press Enlarge or Reduce to adjust the size of the visible area. Scroll the
map as required.

Deleting areas to avoid

To delete a selection from the
“Avoid area” list:

•

From the stored locations menu,
select “Avoid area”.

•

Press DELETE

•

Select the desired area to be
deleted.

•

Press DEL. ALL to delete all
stored areas.

•

Press YES to confirm.

2003 Aviator f/k/a Navigator LS

(231)

Owners Guide (post-2002-fmt)
USA English

(fus)

Entertainment Systems

Summary of Contents for 2003 Navigator LS

























































































































































































































































































































































Search results

Summary of Contents for 2003 Navigator LS

Reviews:

Related manuals for 2003 Navigator LS

Brands by name

Popular brands

Lincoln 2003 Navigator LS, Owner'S Manual

Search results

Summary of Contents for 2003 Navigator LS

Reviews:

Related manuals for 2003 Navigator LS

Brands by name

Popular brands