Lincoln 2003 Navigator LS Owner'S Manual Download Page 48

Page: 48 / 344

The AM/FM control works in radio, CD and navigation modes.

AM/FM select in radio mode

Press AM/FM1/FM2 to switch between AM/FM1/FM2 memory preset
stations.

AM/FM select in CD mode

Press to stop CD play and begin radio play.

AM/FM select in navigation mode

The radio will continue to play in the background of the navigation
screens. To access, press AUDIO then AM/FM1/FM2.

Sound functions

To access settings for Bass, Treble, Balance, Fade, DSP (Digital Signal
Programing), SCV (Speed Compensated Volume), and Occupancy modes:

1. Press AUDIO.

2. Press SOUND.

3. Select from Bass/Treb; Bal/Fade; DSP/SCV.

4. Press +/— to increase/decrease the levels.

2003 Aviator f/k/a Navigator LS

(231)

Owners Guide (post-2002-fmt)
USA English

(fus)

Entertainment Systems

Summary of Contents for 2003 Navigator LS

























































































































































































































































































































































Search results

Summary of Contents for 2003 Navigator LS

Reviews:

Related manuals for 2003 Navigator LS

Brands by name

Popular brands

Lincoln 2003 Navigator LS, Owner'S Manual

Search results

Summary of Contents for 2003 Navigator LS

Reviews:

Related manuals for 2003 Navigator LS

Brands by name

Popular brands