Lincoln 2003 Navigator LS Owner'S Manual Download Page 24

Page: 24 / 344

Fast forward

The fast forward control works in
tape and CD modes.

•

In the tape mode, tape direction
will automatically reverse when
the end of the tape is reached.

•

In CD mode, pressing the control fast forwards the CD within the
current track.

Tape direction select

Press to play the alternate side of
the tape.

Eject function

Press the EJ control to stop and
eject a tape.

Press the EJ control to stop and
eject a CD.

Dolby

姞

noise reduction

Dolby

威

noise reduction operates in

tape mode. Dolby

威

noise reduction

reduces the amount of hiss and
static during tape playback.

Press the

control to activate (and deactivate) the Dolby

威

noise

reduction.

Dolby

威

noise reduction is manufactured under license from Dolby

威

Laboratories Licensing Corporation. “Dolby

威

” and the double-D

symbol

are registered trademarks of Dolby

威

Laboratories Licensing

Corporation.

2003 Aviator f/k/a Navigator LS

(231)

Owners Guide (post-2002-fmt)
USA English

(fus)

Entertainment Systems

Summary of Contents for 2003 Navigator LS

























































































































































































































































































































































Search results

Summary of Contents for 2003 Navigator LS

Reviews:

Related manuals for 2003 Navigator LS

Brands by name

Popular brands

Lincoln 2003 Navigator LS, Owner'S Manual

Search results

Summary of Contents for 2003 Navigator LS

Reviews:

Related manuals for 2003 Navigator LS

Brands by name

Popular brands