manualshive.com logo in svg

Lincoln 2003 Navigator LS, Owner'S Manual

The 2003 Lincoln Navigator LS Owner's Manual is a comprehensive guide for owners to understand and operate their vehicle effectively. Available for free download at manualshive.com, this manual provides detailed instructions, maintenance tips, and troubleshooting information to ensure a seamless and enjoyable driving experience.

Share
Download
background image

Reverse tilt down mirrors

The side mirrors tilt down when the
vehicle is put in R (Reverse).

The reverse mirror feature can be turned ON and OFF through the

Message Center

in this chapter or by using the following key sequence.

This procedure must be performed within 20 seconds.

1. Insert the ignition key in to the ignition switch.

2. Turn the key from the OFF position to the RUN/ON position then back
to OFF three times within 20 seconds.

3. Momentarily activate either the Driver’s or Passenger’s outside mirror
in any direction.

4. Remove the key from the ignition switch to exit programming.

POWER ADJUSTABLE FOOT PEDALS

The accelerator and brake pedal
should only be adjusted when the
vehicle is stopped and the gearshift
lever is in the P (Park) position.

Press and hold the rocker control to
adjust accelerator and brake pedal.

•

Press the top of the control to
adjust the pedals toward you.

•

Press the bottom of the control to
adjust the pedals away from you.

The adjustment allows for approximately 76 mm (3 inches) of maximum
travel.

Never adjust the accelerator and brake pedal with feet on the
pedals while the vehicle is moving.

2003 Aviator f/k/a Navigator LS

(231)

Owners Guide (post-2002-fmt)
USA English

(fus)

Driver Controls

127

Summary of Contents for 2003 Navigator LS

























































































































































































































































































































































Reviews:

No comments

Related manuals for 2003 Navigator LS

DEFA WarmUp 411702 Fitting Instructions Manual preview
WarmUp 411702
Brand: DEFA Pages: 9
rough country Slim Line LED Light Grille Kit Manual preview
Slim Line LED Light Grille Kit
Brand: rough country Pages: 8
AutoWatch 457 Rli Wiring Diagram preview
457 Rli
Brand: AutoWatch Pages: 4
Honda 1991 Civic Online Reference Owner'S Manual preview
1991 Civic
Brand: Honda Pages: 124
Mitsubishi Montero 1988 Manual preview
Montero 1988
Brand: Mitsubishi Pages: 367
WABCO TEBS E Manual preview
TEBS E
Brand: WABCO Pages: 224
Dodge Charger SRT 392 2017 Operating Information Manual preview
Charger SRT 392 2017
Brand: Dodge Pages: 576
Lexus LS 500h 2022 Owner'S Manual, Quick Manual preview
LS 500h 2022
Brand: Lexus Pages: 108
Rigid Hitch BULL BAR Installation Instructions preview
BULL BAR
Brand: Rigid Hitch Pages: 2
Car-Interface CI-RL4-MM-NP Manual preview
CI-RL4-MM-NP
Brand: Car-Interface Pages: 23
Prime Design FEA-0004 Assembly Instructions Manual preview
FEA-0004
Brand: Prime Design Pages: 12
Porsche 92854 Owner'S Manual preview
92854
Brand: Porsche Pages: 145
LaserLine 921K Operating Instructions preview
921K
Brand: LaserLine Pages: 4
Nav TV NTV-KIT956 Manual preview
NTV-KIT956
Brand: Nav TV Pages: 8
Camcar 40072 Mounting Instructions preview
40072
Brand: Camcar Pages: 2
Buick 1997 Park Avenue Manual preview
1997 Park Avenue
Brand: Buick Pages: 420
Kia MOHAVE 2014 Owner'S Manual preview
MOHAVE 2014
Brand: Kia Pages: 417
Saab 32 025 686 Installation Instructions Manual preview
32 025 686
Brand: Saab Pages: 9

Brands by name

Popular brands

Load more brands