Using the power lumbar
support
The power lumbar control is
located on the outboard side of the
seat.
Press one side of the control to
adjust firmness.
Press the other side of the control
to adjust softness.
Using the manual recline
function (if equipped)
Never adjust the driver’s
seat or seatback when the
vehicle is moving.
Do not pile cargo higher
than the seatbacks to
avoid injuring people in a
collision or sudden stop.
Always drive and ride with
your seatback upright and
the lap belt snug and low across
the hips.
To adjust the front seatback using
the manual recliner:
•
Lift and hold the handle located
on the side of the seat.
•
Lean against the seatback to
adjust it to your desired
position. You can recline the
seat back or bring it forward.
•
Release the handle when the
desired position has been
reached.
Seating and safety restraints
67