3. Within five seconds of turning
the ignition to OFF, insert the
second previously programmed
SecuriLock
y
key into the ignition
switch and turn the ignition from
OFF to RUN (maintain ignition in
RUN for at least one second but no
more than 5 seconds).
4. Turn the ignition to OFF and
remove the second SecuriLock
y
key from the ignition switch.
5. Within 10 seconds of turning the
ignition to OFF, insert the
unprogrammed SecuriLock
y
key
(new key) into the ignition switch
and turn the ignition from OFF to
RUN (maintain ignition switch in
RUN for at least one second). This
step will program your new
SecuriLock
y
key.
6. If it is desired to program
additional SecuriLock
y
key(s),
repeat this procedure from step 1.
If the programming procedure was
successful, the new SecuriLock
y
key(s) will start the vehicle’s
engine. The theft indicator (located
on the instrument panel) will light
for three seconds and then go out.
If the programming procedure was
not successful, the new
SecuriLock
y
key(s) will not
operate the vehicle’s engine. The
theft indicator will flash on and off.
Wait at least one minute and then
repeat the procedure from step 1.
If failure repeats, bring your
vehicle to your dealership to have
the spare SecuriLock
y
key(s)
programmed.
Controls and features
63