4. Remove headlamp by taking the
pins out. Pull headlamp forward to
access headlamp connector.
5. Disconnect the electrical
connector from the bulb by pulling
the connector rearward.
6. Remove the bulb retaining ring
by rotating it counterclockwise
(when viewed from the rear) to
free it from the bulb socket, and
by sliding the ring off the plastic
base. Keep the ring because it will
be used again to retain the new
bulb.
7. Remove the old bulb from its
socket by gently pulling it straight
back out of the socket. Do not turn
the bulb while removing it.
To install the new bulb:
1. Insert the glass end of the bulb
into the socket. You may need to
turn the bulb left or right to line
up the grooves in the plastic base
with the tabs in the socket. When
the grooves are aligned, push the
bulb into the socket until the
plastic base contacts the rear of
the socket.
Maintenance and care
168
