3. Press the programmed
HomeLink
t
control in the vehicle
until the training light on the
garage door receiver turns solid
(1-2 seconds). Release the
HomeLink
t
control and repress to
turn off the training light.
4. Press the HomeLink
t
control
again. If the garage door activates,
the HomeLink
t
Universal
Transmitter has been trained to
the receiver.
Erasing channels
To erase all three programmed
channels:
1. Hold down the two outside
controls until the red light begins
to flash.
2. Release both controls.
Channels cannot be erased
individually, but can be
reprogrammed. Refer to
Programming
for instructions.
MOON ROOF (IF EQUIPPED)
To open the moon roof:
•
Press and release the control.
•
For one-touch operation, press
and release the rear portion of
the control; this will fully open
the moon roof.
•
To stop one-touch operation at
the desired position, press and
release the forward portion of
the control.
Controls and features
46