English
English
37
Parameter Name
and
Description Range
P.37
USB Options - Load User Mems & P-Nums from USB
Allows operator to scroll through files on a mounted USB drive in the
"\Lincoln\Memories" folder, if files exist in that folder. The operator can then
choose a file, and if it is a valid memory set file, the UI will then prompt the
operator what data to load. There will be three options:
(1) Load All - this will load the User Memories and P-Numbers stored in the
backup file.
(2) Load Mems Only - this will load only the User Memories stored in the
backup file.
(3) Load P-Nums Only - this will load only the P-Numbers stored in the backup
file.
The operator will be informed of success or failure of the load by a message on
the User Interface.
If the feeder is single-head, and the backup file is from a dual-head feeder, the
User Memories from Head 1 of the backup file will be loaded to the feeder.
If the feeder is dual-head, and the backup file is from a single-head feeder, the
User Memories from the backup file will be loaded to Head 1 of the feeder.
Note: This option will only appear in the menu if (1) a USB module is in the
same group as the UI and (2) a USB drive has been plugged into the USB port
and was properly mounted.
USB Options - Save User Mems & P-Nums to USB
Allows operator to save the User Memories and P-Number settings to a
mounted USB drive. The file name will be automatically generated and saved
into the "Lincoln\Memories" folder on the USB drive. If the directory does not
exist, it will be created.
The name of the backup file that is created will be displayed on the UI as the
save is in progress. The operator will will be informed of success or failure of
the save by a message on the User Interface.
Note: This option will only appear in the menu if (1) a USB module is in the
same group as the UI and (2) a USB drive has been plugged into the USB port
and was properly mounted.
USB Options - Create USB Key
This option creates a unique USB Key and saves it to the USB drive that is
plugged into the system. The key is saved to the "\Lincoln\Keys" directory on
the USB drive. The directory will be created if it does not exist.
The key file that is created will allow the operator to unlock *only* that feeder
with *only* that USB drive. If the drive is plugged into another feeder, the newly
created key will not be valid on that feeder. Also, if the newly created key file is
placed onto another USB drive, the key will no longer be valid.
A USB drive can have multiple keys for multiple feeders. This option will not
overwrite any existing keys, it will only create new keys. All keys will be stored
in the "Lincoln\Keys" directory.
Note: This option will only appear in the menu if (1) a USB module is in the
same group as the UI and (2) a USB drive has been plugged into the USB port
and was properly mounted.
Load
Mems/P-Nums
Save
Mems/P-Nums
Create
USB Key
P.41 WFS
Offset
Allows the operator to adjust the speed of the WD drive rolls. The adjustment
can range from -5% to +5% of normal speed.
On dual-head Power Feed 84 Feeders, a different setting can be used for
each head. The operator will be prompted to select which head to edit
before the setting can be changed.
Note: This option may not be available on all machines. The wire drive must
support this functionality, or this option will not appear in the menu.
-5% to 5%
(default is 0%)
