Lincoln Electric K14110-1, Operator'S Manual, Page: 27 / 35

English English 24
Wire Spool Type S200 Loading
WARNING
Turn the input power OFF at the welding power source
before installation or changing a wire spool.
Figure 22.

Turn the input power OFF.

Open the spool wire case.

Unscrew the Locking Nut [35] and remove it from the
Spindle [37].

Place the adapter of spool type S200 [39] on the
spindle [37] making certain the spindle brake pin [38]
is put in the hole in back side of the adapter [39]. The
adapter of spool type S200 can be purchased
separately (see "Accessories" chapter).

Place the spool type S200 [41] on the spindle [37]
making certain that the adapter brake pin [40] is put
in the hole in the back side of the spool.
WARNING
Position the spool type S200 so that it will rotate in a
direction when feeding so as to be de-reeled from
bottom of the spool.

Re-install the locking nut [35]. Make sure that the
locking nut is tightened.
Wire Spool Type B300 Loading
WARNING
Turn the input power OFF at the welding power source
before installation or changing a wire spool.
Figure 23.

Turn the input power OFF.

Open the spool wire case.

Unscrew the Locking Nut [35] and remove it from the
Spindle [37].

Place the adapter of spool type B300 [42] on the
spindle [37]. Make certain that the spindle brake pin
[38] is put in the hole in the back side of the adapter.
The adapter of spool type B300 can be purchased
separately (see "Accessories" chapter).

Re-install the locking nut [35]. Make sure that the
locking nut is tightened.
Figure 24.

Rotate the spindle and adapter so the retaining
spring [43] is at the 12 o'clock position.

Place the spool type B300 [45] on the adapter [42].
Set one of the B300 inside cage wires [46] on the
slot [44] in the retaining spring tab [43] and slide the
spool onto the adapter.
WARNING
Position the spool type B300 so that it will rotate in a
direction when feeding so as to be de-reeled from
bottom of the spool.