34
LINCE ITALIA S.p.A.
Fig. 46
The next screen that is proposed, allows to immediately set the parameters related to the code for which the memorization has been
requested. Select the type of code from the drop-down menu, set the name you want to assign and the programs that the code can
switch. Regarding the permissions granted to each type of user (user, administrator, installer), refer to the table on the next page.
5.5.3 Change parameters Keys and codes and delete (administrator)
In the “Keys / Codes” section it is possible to log in only with administrator privileges. Select from the “Keys / Code Choice” menu
based on the name assigned during storage; it is therefore possible to change all the parameters and attributes related to them.
By clicking on “Modify” it is possible to modify the parameters of a code and search for it simply by entering it in the appropriate
window that appears immediately.
By clicking on “Delete” you can delete the selected code / key, then select “Yes” on the next screen to confirm.
After changing any parameter of any key / code, press “Apply” before moving on to the next one to make the changes effective.
Fig. 47
