- - 7
4. Insert the PLASTIC BOTTOM COVER
(#38, #39) into the UPRIGHT TUBE (#3, #4)
vertically.
Notice: Please don’t tighten the bolts and
nuts until all the assembly steps are
completed.
5. Insert the
HANDLEBAR BOTTOM COVER (#13, #14)
into the UPRIGHT TUBE (3, 4) separately.
6.
Connect the signal lines (#110, #113, #144) on both
side of the COMPUTER (#5) and the signal lines (#111a,
#114a, #145a) of the UPRIGHT TUBES (#3, #4); then
insert the COMPUTER (#5) into the left and right upright
tube
.
7. Put the BOLT (#63) and the WASHER (#57) together,
then lock the COMPUTER (#5) onto the UPRIGHT
TUBES (#3, #4) with #6 ALLEN WRENCH.
Notice: Please don’t tighten the bolts and nuts until
STEP 3:
STEP 4:
STEP 5:
Summary of Contents for D15.0
Page 1: ... 0 OWNER S MANUAL ...
Page 27: ...4 EXPLODED DRAWING ...
