Lime D15.0, Owner'S Manual, Page: 7 / 30

- - 6
13
LEFT
HANDLEBAR
BOTTOM
COVER
1 128 3LB DUMBBELL 2
14
RIGHT
HANDLEBAR
BOTTOM
COVER
1 129 4LB DUMBBELL 2
38
LEFT PLASTIC
BOTTOM
COVER
1 182 SCREW ST4.2*19 4
39
RIGHT
PLASTIC
BOTTOM
COVER
1 183 BOLT M8*15 2
47 PEDAL COVER 1 5#ALLEN WRENCH 1
57 WASHER 10 14 ALLEN WRENCH 1
61 WASHER 8 2 WRENCH W/SCREW DRIVER 1
63 BOLT M10*25 14
FIXING TOOLS:
#5 ALLEN WRENCH (5mm): 1pcs
#6 ALLEN WRENCH (6mm): 1pcs
WRENCH W / SCREW DRIVER (S = 13, 14, 15): 1pcs
ASSEMBLY INSTRUCTION:
STEP 1:
STEP 2:
1. Open the carton, take out the spare parts,
and put the MAIN FRAME (#1) on the
ground.
2. Connect the signal line (#145) at the end of
the LEFT UPRIGHT TUBE (#3) and the signal
line (#146) at the bottom of the MAIN FRAME
(#1), then insert the LEFT UPRIGHT TUBE (#3)
into the unit.
Notice: Don’t do assembly with strong
force, you may break the insulating layer of
the signal line, or the plug pins may be
curved, which would result in bad signal
connections.
3. Put the BOLT (#63) and the WASHER (#57)
together,then lock the LEFT UPRIGHT TUBE
(#3) onto the MAIN FRAME (#1) with #6 ALLEN