Lime D15.0, Owner'S Manual

Page: 19 / 30

- - 18
6-8-2. When we choose the program and press the start key, the orientation and control of INC/Speed will
carry out automatically as per the profile curve of program display on the LED Bar. Meanwhile,
INC/Speed will adjust and orientate automatically.
6-8-3. Each program has 20 segments, the practice time of every segment is 1min(when time is showed
with count up). 20 segments finished is 1 loop. Every data will be clear when we press the stop key
during practice of the program.
6-8-4. The practice time of each segment is the time set up /20min if the time is set as count down mode;
when time count down to zero and restart, the practice time of each segment is 1 min.
6-8-5. When the program is carrying out, we can press the speed up/down key to adjust the speed data
for each segment, the LED bar and speed will adjust simultaneously.
7. User program:
The Program display U “n” (n from number 1 - 5)
When process U1~U5 Program, Speed/incline Profile will display per 5s interval
7-1. Press“mode key” to enter into the setting of models then the Profile display glittering.
Time→ Speed Profile 1~20 BAR → incline Profile 1~20 BAR → TIME
7-2. When user program have set, press “KM/M “key to exchange, all the programs the user set
before are clear off. The user must reset programs.
7-3. When not press mode key, the time default display 0:00; press start key, the program will calculate
all kinds of data, and output the message according to the profile graph.
7-4. Press mode key, the flash will present according to the segment, press up / down key to
set the
profile, the graph won’t stop until all 20 programs finished setting, or press start key for releasing
from the setting mode, the profile set up will save to EEPROM in case take out the database
7-5. When we choose the program and press the start key, the orientation and control of incline/Speed
will carry out automatically as per the profile curve of program display on the LED Bar. Meanwhile,
incline/Speed will adjust and orientate automatically.
7-6. A loop including 20 segments, press the “stop” key to stop it during it is running.
7-7. The next speed and incline will be flashed before 3s when it is newlining.
7-8. The practice time of each segment is the time set up /20min if the time is set as count down mode;
when time count down to zero, time count down is not set and restart, the practice time of each
segment is 1min.
a). Manual profile display:
b). 8*8 profile area: