Lime D15.0, Owner'S Manual, Page: 17 / 30

- - 16
and the incline should be got back to the original data.
5-2. Whatever the manual, p1~p15, user are all in their stand by state, when we press the start key, it
will begin to count down in 3 seconds with the alarm “bi-bi-bi” and the letter of “GO” which are
showed in the middle of dot matrix. The computer will be open too, the details are:
3(bi)-2(bi)-GO-START.
5-3. Scan function:
5-3-1. In the START MODE, it will display cycledly “incline/speed profile, multi-data (incline/pulse, cal/dist)
for each 5s. The relative indicator light will be lighted when we choose the specific function; when
we press the incline key, the indicator light of the compound function will transform into the function
which the key will show.
5-4. Program function:
5-4-1. It will show a playground when it is in MANUAL state.
5-4-2. It will show profile in the dot matrix LED.
---Program, user display Incline / Speed profile. Incline/Speed profile are both sharing window.
---User program take the use of speed / incline up, down key to adjust the incline / speed profile.
---The exercise time which the program preset is 20 min. When the operating time is set, the
operating time per section is average. If it is not set, 1 min per section.
Speed: End” and flicker 40 times, tweeting twice. 50s later, all the window will be clear into the
stand by state. During the 50s, if any keys be pressed, it will get back to the stand by state.1 min is
preset per section under the program of P1~P15, U1~U5. (1*20=20 min)
5-6-3. When time is calculated by Count down, the setting range is 05:00~99:00. When count down to
zero, alarming twelve times and data of the window will be flickering, everything will stop and the
motor will stop too.
5-7. Distance
5-7-1. Distance is calculated by Count up & Count down. Distance will be calculated by count down if it is
preset. It will be calculated by count up it isn’t preset.
5-7-2. When distance is calculated by Count up, the counting range is 0.00
～
99.9. It will be clear and
calculate once more if it is beyond the range.
5-7-3. When distance is calculated by Count down, the counting range is 1.00
～
99.0. When count down to
zero, alarming twelve times and data of the window will be flickering, everything will stop, power is
disable and motor stop.
5-7-4. Setting distance: press mode key, data flash.
5-8. Calories
5-8-1. Calories is calculated by Count up & Count down. Calories will be calculated by count down if it is
preset. It will be calculated by count up it isn’t preset.
5-8-2. When calories is calculated by Count up, the counting range is 0
～
999, it will be clear and calculate
once more if it is beyond the range. When calories is calculated by Count down, the setting range is
5.0~995, step ±5. When count down to zero, alarming twelve times and jump to setting state, motor
stop.
5-8-3. CAL=0.0049*speed*time* :
1+?%
.