Grasping the end of the uterus with the other
hand pull free from the perineum
7
The uterus must then be separated from the
bowel which should remain attached to the
perineum. Grasp the bowel in one hand and
carefully pull the uterus section with the other hand.
8
To fit a new uterus simply reverse the steps in the ‘Removal of used uterus’ section.
Unpack the new Uterus ready to fit to the SFPT
1
Feed the bowel through the opening in the
back of the uterus
2
Unscrew the remaining white turn screw at
the bottom of the pelvic clamp
4
Remove the pelvic ring clamp
5
Carefully attach the uterus to the attachment
points around the perimeter
6
Place the pelvic ring clamp back on the
model, ensuring that the uterus tubes pass
underneath the clamp
7
