Attach the vaginal part to the model by
pushing each vaginal tab into the securing
slots on the perineum
6
On the back of the uterus, locate the cardinal
and uterosacral ligaments in the lower part of
the pelvis (there are four ligaments in total,
two either side), and attach to the model using
the connectors
7
Press the white pegs firmly into the black
securing holes
8
Attach the uterus to the attachment points
around the perimeter
9
Undo three attachments of each side
1
Unclip popper fasteners above the perineum
2
Holding both sides of the skin carefully lift
it free from base
3
