Using the hand pump create pressure within
the blood bag which will force the blood
around the circuit and back out through the
ovarian artery tubing. Do not over pressurise.
8
Then clamp off the larger tube when the
blood has reached the white clamp. The blood
system is now ready and primed.
9
First undo the three white turn screws located
around the rim of the pelvis
1
Remove pelvic ring clamp
2
Locate the fallopian tube with ectopic
pregnancy
1
Using the blunt dispensing tip supplied,
carefully inject 3ml of blood into the ectopic
pregnancy through the fimbriae end
2
For the fibroid, use 5ml of blood and using
the dispensing tip insert the blood in 5 spots
around the fibroid. Be aware that this can
take some force to inject into the fibroid due
to its dense fibrous nature
3
Both the fibroid and Ectopic Pregnancy are designed to have simulated blood added to them
to increase the realism when surgical removal is performed. To begin, mix up the blood
concentrate with the correct ratio of water (follow the instruction on the side of bottle).
1
2
3
5
4
