Lilin PSD4624EX20, User Manual

Page: 8 / 42

7
Chapter 2 Before Accessing IP PTZ Cameras
Before accessing to the IP PTZ camera, make sure that the camera’s RJ-45 network cable, audio cable,
and IP PTZ camera’s power cable are properly installed. For IP address setup, please consult your
network administrator for available IP addresses. The default IP address of IP camera is 192.168.0.200.
User can also use the default IP address to verify IP camera’s network connection.
Chapter 2-1 Configuring IP Addresses Using the IPScan Utility
To configure the IP address of your cameras, download IPScan from our official website:
http://www.meritlilin.com/webe/html/download . Or, you can execute the IPScan installer from the
installation CD directly. To change the IP address, subnet mask, gateway, or HTTP port of your cameras,
follow the steps below:

Run the IPScan utility.

Click Refresh . All available devices will be listed on the screen.

Select the device item from the device list.

To edit or modify IP address, subnet mask, gateway, or HTTP port, use the box.

Click Apply for the changes to take effect.

Click Refresh again to verify the changed settings.
Note: Make sure your IPScan is version 1.0.0.52 or above.