26
auto scan path setup.
Auto Scan Path: Select a scan path (1
–
16) from the drop-down list.
Dwell Time: Set the time you want the camera view to stay at the start position or end
position.
Speed: Set the scanning speed between two positions.
Start Position: Set the start position of the selected scan path.
End Position: Set the end position of the selected scan path
To set up an auto scan path, please first select a path number from the drop-down list. Then move
the cursor to the PTZ control pane, and move the camera to a desired view (PTZ controls) as the
start point of an auto scan path. Click
Apply
next to
Start Position
and move around the camera
view at will to program the auto scan path via PTZ controls. When you finish programming, click
Apply
next to
End Position
to end the programming process. Next, assign a
Dwell Time
and
Speed
for the current path from the respective drop-down list.
Chapter 4-5-3 Tour Setup [Path: Basic>> PTZ>> Advance >> Tour Table]
The IP Fast Dome Camera supports up to sixteen tour paths; each path can include up to 32 preset
positions. Please refer to the instructions below to program a Tour table.
NOTE: Before setting this function, users must pre-define at least two Preset Points.
Tour Path: Choose a tour path to set up.
Summary of Contents for PSD4624EX20
Page 1: ......
Page 30: ...29 Chapter 5 2 2 Audio Adjust Path Video Audio Audio Adjust...
