Manual control Scanner or Fast Dome Camera as follows:
Select the monitor and camera first. If Fast Dome Camera or Scanner is set as Camera 1 and the 1st monitor
is selected, start the process from the MENU As shown above:
1. Press numeric key 1 followed by MON key to bring up the "<" sign.
2. Under the "<" sign, press numeric 1 followed by CAM key to select Camera 1.
(Scanner or Fast Dome Camera)
3. When the scanner or fast dome camera is in Auto Pan mode, you must cancel the Auto Pan mode before
manual operation.
PAN/TILT Control
Joystick can be used to move scanner or to control Fast Dome Camera up, down, left and right.
Scanner's moving range depends on your setting. Fast Dome Camera's PAN is 360 degree
continuously, TILT is 100 degree.
FOCUS & AUTO FOCUS Control
FOCUS FAR key: Object becomes further.
FOCUS NEAR key: Object becomes nearer.
AUTO FOCUS key: Auto focusing.
IRIS & AUTO IRIS Control
IRIS O key: Iris open.
IRIS C key: Iris close.
AUTO IRIS key: Auto iris.
ZOOM IN/OUT Control
ZOOM IN key: Viewing angle become narrower, stop when key is released.
ZOOM OUT key: Viewing angle become wider, stop when key is released.
Controlling Scanner or Fast Dome Camera
MON
01 <H>
CAM
01>CAMERA01
10/13/98
17
28
01
MON
01 <H>
CAM
01>CAMERA01
<
10/13/98
17
28
01
1
2
4
3
5
5
5
5
16
