The Matrix can switch up to 16 monitors and 64 cameras. It is necessary to recall a monitor then the camera to
gain control:
1. From the Master keyboard, press numeric key (monitor ID) 1 followed by MON key. Control sign "<"
will appear on 1st monitor. Only the master keyboard can enter setting mode and slave keyboards only
can enter operation mode.
2. Under the "<" sign, other monitors can also be selected, steps as above. When finish selection, the "<"
will appear on the selected monitor.
Eg.
Press numeric key 2 followed by MON key. Control sign "<" will appear on 2nd monitor.
Press numeric key 3 followed by MON key. Control sign "<" will appear on 3rd monitor.
3. From the keyboard, press numeric key (camera ID) 1 followed by CAM key, 1(1st camera) number will
appear on the monitor.
Eg.
Press 1 CAM to select camera 1.
Press 1 6 CAM to select camera 16.
4. If incorrect data is entered, "ACCESS DENIED" will appear on the monitor as shown below.
Eg.
If 6 5 CAM is entered, ACCESS DENIED will appear. Since this system can only control a max of 64
cameras.
If 3 CAM keys are pressed and the ACCESS DENIED appears, that means the 3rd video input is not
connected or the 3rd camera is not set in the sequence table.
Enter MON
or CAM
Recalling Monitor or Camera
MON
01 <H>
CAM
01>CAMERA01
<
10/13/98
17
28
01
MON
01 <H>
CAM
01>CAMERA01
<1
10/13/98
17
28
01
MON
01 <H>
CAM
01>CAMERA01
< ACCESS DENIED
10/13/98
17
28
01
15
