Push joystick down to select <OK>, and then press
key to confirm and back to password
function menu, or push joystick down to select <CANCEL>, and then press
key to cancel
password. These numbers of Edit column will be reset to "1111".
Note: When edit password setting and camera recording function are simultaneously performed,
please stop recording function first; otherwise frame of password setting will be recorded,
too.
EDIT THE PASSWORD
0 1 2 3 4 5 6 7 8 9
1 1 1 1
OK
CANCEL
To modify password after editing password completed, please get in <EDIT PASSWORD>
again to edit.
If password function is ON, previous passwords have to enter on the setting menu first, and
then do modifying password.
4. Modify Password
C.SET
CTRL1
C.SET
CTRL1
After password function is ON, press
key to display frame of input password on the screen.
When protocol is MLP1, push joystick up or down to select number 0~9 and press
key to
confirm. Select numbers will become to "*".
Repeat above steps until passwords have been completed. If password is correct, setting menu
will be displayed.
When protocol is MLP2, press number
~
key on the keyboard to input, and then press
key to confirm. If password is correct, setting menu will be displayed.
Note: If not enter password within 10 sec or input password is wrong, "Invalid password" will
be show on the screen. Primary password is "1111".
5. Input Password
ENTER PASSWORD
C.SET
CTRL1
ENT
0
9
56
