Tour Function Setting Menu
After getting in dome setting menu, push joystick down to select <TOURS>, and then press
key into tours setting menu.
1. Display the Tour Setting Menu
TOURS
NUMBER
<EDIT TOUR>
<CLEAR ABOVE NUMBER>
DWELL TIME
SPEED
BACK
EXIT
1
5 sec
255 deg/sec
Push joystick down to select <NUMBER>, and then push
joystick left or right to select Tour1 or 2.
2. Tour Number Selection
C.SET
CTRL1
TOUR TABLE 1 - 1/4
1. PRESET 1
2. PRESET 6
3. PRESET 8
4.
5.
6.
7.
8.
BACK
EXIT
Push joystick down to select <EDIT TOUR>, and then press
key into edit tour setting.
Push joystick up or down to select number. When joystick down to last line, push joystick
down again to get in next table of page. Each tour table can edit 32 presets.
Push joystick left or right to select preset. (1~128)
Press
key to confirm, and push joystick to select <BACK>, then press
key again to
back to tours setting, or push joystick to select <EXIT>, and press
key to exit setting menu.
3. Edit Tour
Push joystick down to select <CLEAR ABOVE NUMBER>, and then press
key to cancel
tour.
4. Cancel Tour
Push joystick down to select <DWELL TIME>, and then push joystick left or right to select
dwell time of tour. (1~255 sec)
Note: When Self Return Mode or Auto Mode is Tour, dwell time of Auto Pan will be dwell time
setting of tour.
5. Dwell Time Setting
Push joystick down to select <SPEED>, and then push joystick left or right to select preset
speed. (1~255 deg/sec)
Note: When Self Return Mode or Auto Mode is Tour, speed of Auto Pan will be speed setting
of tour.
6. Speed Setting
TOUR TABLE 1 - 1/4
1.
2.
3.
4.
5.
6.
7.
8.
BACK
EXIT
C.SET
CTRL1
C.SET
CTRL1
C.SET
CTRL1
C.SET
CTRL1
C.SET
CTRL1
52
