Push joystick down to select <OUT>, and then push joystick left or right to select alarm output
mode:
4. Alarm Output Control Setting
Push joystick down to select <OUT TIME-OUT>, and then push joystick left or right to select
return time of alarm output:
5. Alarm Output Return Time Setting
Password Function Menu
After getting in dome setting menu, push joystick down to select <PASSWORD>, and then
press
key into password function menu.
1. Display the Password Setting Menu
PASSWORD
ENABLE PASSWORD
<EDIT PASSWORD>
BACK
EXIT
OFF
Push joystick down to select <ENABLE PASSWORD>, and then push joystick left or right to
select <ON> or <OFF>.
2. Password Setting
Push joystick down to select <EDIT PASSWORD>, and then press
key into edit password
setting.
Push joystick left or right to select number 1~9, and then press
key to confirm. The number
that is selected will be displayed on the edit column.
Repeat above steps until password setting has been completed.
3. Edit Password Setting
C.SET
CTRL1
C.SET
CTRL1
C.SET
CTRL1
(Fast Dome IP Camera not support)
OFF
IN 1
IN 2
IN 3
IN 4
IN 5
IN 6
ANY
OFF: NO action.
IN 1: Only alarm input 1 will be start.
IN 2: Only alarm input 2 will be start.
IN 3: Only alarm input 3 will be start.
IN 4: Only alarm input 4 will be start.
IN 5: Only alarm input 5 will be start.
IN 6: Only alarm input 6 will be start.
ANY: All of alarm input <1~6> will be start.
100MS
200MS
300MS
400MS
500MS
1000MS
5000MS
4000MS
3000MS
2000MS
55
