(4) White Balance Setting
Push joystick down to select <WHITE BALANCE>, and then push joystick left or right
to select white balance mode.
ATW: Auto Tracing White Balance, suitable for 2500~9500K color temperature
environment.
PUSH: Push mode, suitable for 2300~10000K color temperature environment.
MWB: Manual White Balance, suitable for 2500~9500K color temperature
environment.
Select <MWB>, and press
key into MWB adjustment image, and then push
joystick left to adjust white balance to higher color temperature or push joystick
right to adjust white balance to lower color temperature.
Confirm color temperature, and then press
key to recode datum in the memory.
ATW
PUSH
MWB
C.SET
CTRL1
C.SET
CTRL1
(5) Day/Night Setting
Push joystick down to select <DAY/NIGHT>, and then push joystick left or right to select
mode.
AUTO: When light level is over 10 lux, camera switches DAY automatically to
produce color image. When light drops below 5 lux, camera switches NIGHT
automatically to produce monochrome image. Under monochrome mode,
sensitivity is increased to 0.01 lux and can be used with IR illuminators.
SCHED.: DAY/NIGHT switches automatically between Day mode and Night mode by
schedule of time setting.
When selection is <SCHED.>, press
key into DAY/NIGHT Setting menu.
Push joystick down to select <DAY
NIGHT>, and then press
key into time
setting. Push joystick left or right to select time of DAY
NIGHT. Then press
key again to next item.
18 : 00
18 : 00
18 : 00
AUTO
SCHED.
DAY
NIGHT
DAY/NIGHT
DAY
NIGHT
NIGHT
DAY
BACK
EXIT
18:00
06:00
C.SET
CTRL1
C.SET
CTRL1
C.SET
CTRL1
C.SET
CTRL1
C.SET
CTRL1
44
