1
2
4
3
5
5
5
5
After you completed the installation and initially power up, the panorama camera will perform self-test procedure,
the camera calibrates and checks the basic function, controlling the camera is possible after self-test is completed.
If preset positions and tours have been programmed into a panorama camera and the power is turned off, the
panorama camera will enter the Auto Scan mode once the power is turned on again (after self-test period). The
panorama camera will remain in Auto Scan until an operator cancels it.
Initial Power Up Inspection
To control the pan and tilt movement of the panorama camera screen, simply use the joystick on the keyboard; to
pan the panorama camera screen. left push the joystick to the left, to tilt down pull the joystick down (towards you).
To move the panorama camera screen faster, push the joystick further in that direction, the joystick is proportional
to the speed of the panorama camera; a small movement will move the panorama camera screen slower.
Manual Operation (Pan/Tilt Control)
1
2
3
4
5
14
OPERATION
UP
Push the joystick forward, the camera tilt up.
DOWN
Push the joystick down (towards you), the camera tilt down.
LEFT
Push the joystick left, the camera pan left.
RIGHT
Push the joystick right, the camera pan right.
DIAGONAL
Push the joystick diagonally, the camera moves to that direction (direction on figure 1)
Figure 1
Relationship Between Joystick and Direction
Figure 2
Relationship Between Joystick and Rotation Speed
