Lilin 7000MPG4OOE, User Manual

Page: 74 / 92

6. Setting Preset Dwell Time
The dwell time means the time user wants to view on certain preset position under Auto Pan the Preset Dwell
Time can be set between 0 ~ 255 seconds. (The factory default is 0 second)
* If the dwell is set to 0 second then that position will be omitted from the Auto Pan tour.
To set dwell to 5 seconds: Push key 5 followed by F2 key.
Example:
To set dwell to 5 second: 5 F2 keys
To set dwell to 10 second: 1 0 F2 keys
7. Storing Preset Data
Once the above steps have been completed, the information must be stored or it will not be memorized by the
system.
Push key 1 followed by F3 key, two beeps will be heard confirming that data is stored.
Note:
For the first 16 presets on each dome, the above steps must be repeated. For presets 17 ~ 128 there is
a default speed and dwell setting so steps 5 and 6 are not required.
Recalling Preset Positions
Once the required preset points have been stored in a dome, they may be quickly recalled returning the dome to exact
position.
To recall 1st Preset Point: Push key 1 followed by PRESET key. The dome will move to that position in speed of 360
o
/
sec.
Example:
To recall 1st preset point: 1 PRESET keys
To recall 128th preset point: 1 2 8 PRESET
keys
73