Lilin 7000MPG4OOE, User Manual

Page: 43 / 92

5. Set preset speed. The speed the dome travels to that preset point can be adjusted between 1
o
to 255
o
per
second.
6. The presets 1 ~ 4 can be entered a name for identify. Just fill the text string into the Position Name field.
7. Save the preset point. Once the above steps have been completed, the information must be stored or it will
not be memorized by the system.
Note:
For the first 16 presets on each dome, the above steps must be repeated. For presets 17 ~ 128 there is
a default speed and dwell setting so steps 4 and 5 are not required.
Setting Preset Group for Auto Pan
The purpose of setting preset group allows the management of the 16 preset points before Auto Scanning. The
first 16 preset points are separated into 4 groups. Preset group must be set for the auto pan reference.
Group 1 includes: 1st, 2nd, 3rd and 4th preset points.
Group 2 includes: 5th, 6th, 7th and 8th preset points.
Group 3 includes: 9th, 10th, 11th and 12th preset points.
Group 4 includes: 13th, 14th, 15th and 16th preset points.
To select the groups, click on the check boxes of the groups, then click [Submit] button to save the changes.
Activate / Stop Auto Pan
When the Auto Pan function is activated, the dome camera will auto touring the preset groups entered.
To activate: Click the arrow button. (“Auto Pan” message will be displayed on the screen.)
To stop: Click the rectangle button. (“Auto Pan” message is not displayed.)
Deleting Preset Points
Sometimes it is necessary to delete the stored preset points. Just click the [Remove] button.
Note:
All the preset points can be cleared by clicking on [Remove] button.
– Setting Day / Night Mode (available for 25X NDC)
There are 3 modes can be selected to set the IR Cut Filter for different environment. Click on to switch the
modes.
IRC IN : IR Cut Filter is ON and always produce constant color image.
IRC OUT : IR Cut Filter is OFF and always produce monochrome image.
IRC AUTO : When light level is over 30 Lux, IR Cut Filter switches IN automatically to produce color image. When
light drops below 10 Lux, IR Cut Filter switches OUT automatically to produce monochrome image. Under
42