LDT10
4. the
System Loader
page will appear on the display;
5. press the
RUN
key;
6. the
Panel Setup
page will be displayed; press the
UPDATE FROM FILE
key;
7. once you press the
UPDATE FROM FILE
key the
Open
dialogue box
appears on the screen: you must open the folder where the firmware
upgrading .PRP file released by Lika Electronic is located;
8. select the .PRP file and confirm the choice by pressing the
OPEN
button,
the dialogue box closes;
9. the process will start and a status bar will appear to show the installation
progress;
MAN LDT10 E 1.2
HMI interface
41 of 44
