LDT10
necessary to specify the actuator model that you are going to match with the
node position.
For instance, if you need to install a RD1A-...-MB- actuator having “1” physical
address then you must press the
RD1
key in the
Actuator 1
line and optionally
enter a brief description (max. 8 digit long) in the field on the right of the
Actuator 1
label (the description will appear in all pages of the interface to
identify the device having the node address 1). As soon as you press on the
description field an on-screen alphanumeric keypad will appear on the display:
enter the description and then press the
ENT
key to confirm. See the example in
the Figure below.
Press the
page.
MAN LDT10 E 1.2
HMI interface
24 of 44
