LD25x
7.2 Operational parameters
Menu
Setting Range
Default
m FAc
M-Factor *
Multiplying factor for the SSI value
(after consideration of possible bit blanking).
-9.999 … 9.999
1.000
d FAc
D-Factor *
Dividing factor for the SSI value
(after consideration of possible bit blanking).
0.001 … 9.999
1.000
p FAc
P-Factor *
This signed value will be added to the SSI result
(after consideration of possible bit blanking).
-199999 …
999999
0
dPoiA
Decimal Point
Setting according to the decimal formats shown in
the display.
000000
00000.0
...
0.00000
00000.0
diSPLA
Display
Display mode of the unit:
norm:
regular scaling of the display;
359.59:
angular display format 359° 59' with use of
the “Round-Loop” function. For more details see
section “8.4.2 “Round-Loop” function” on page 32.
norm
359.59
Norm
Hi bit
Hi Bit **
“Bit Blanking” function: defines the highest bit for
evaluation. To evaluate all encoder bits this
parameter has to be set to the total number of bits
according to setting. For more details see section
“8.2 Evaluation of encoder bits” on page 28.
1 … 32
25
Lo bit
Lo Bit **
“Bit Blanking” function: defines the lowest bit for
evaluation. To evaluate all encoder bits this
parameter has to be set to "01". For more details see
section “8.2 Evaluation of encoder bits” on page 28.
1 … 31
1
* Scaling details are explained in section “8.3 Scaling of the display” on page 29.
** For more details about “Bit Blanking” function see section “8.2 Evaluation of encoder bits” on
page 28.
MAN LD25x E 1.0.odt
Set-up procedure
16 of 44
