SFA-5000 • SFA-10000 Profibus
4.2 Profibus encoder with PGs: PG version (Figure 2 and Figure 3)
Figure 3
The draw-wire encoder is fitted with three PG9 cable glands for Power Supply,
BUS IN and BUS OUT connections. The bus cables can be connected directly to
the terminal connectors in front of each cable gland. We recommend Profibus
certified cables to be used. Core diameter should not exceed Ø 1.5 mm (0.06
inches).
Terminal connector
Description
-
0Vdc power supply voltage
+
+10Vdc +30Vdc
power supply voltage
G
Profibus GND
1
B
Profibus B (Red)
A
Profibus A (Green)
PG
Shield
2
1
Profibus GND is the 0V reference of Profibus signals, it is
not connected to 0Vdc supply voltage.
2
Connect the cable shield to cable gland.
MAN SFA_5000_10000_PB E 1.0
Electrical connection
26 of 72
