AMM5A & AMM5B • SSI, BiSS, & RS-485
4.6 Standard counting direction
The standard counting direction provides the count up information when the
shaft/code disk turns as shown in the Figure below (clockwise rotation viewed
from the flange side). The counting direction is fixed and cannot be changed.
Figure 6 - Standard counting direction
WARNING
Light alters significantly the proper operation of the system.
Please mount the motor cap and protect the encoder from light sources before
starting the system and checking its operation. The encoder has been calibrated
to perform at its best without any light interference.
MAN AMM5A_B SSI_BiSS_RS485 E 1.9.odt
4 - Electrical connections
26 of 56
