LiGo DORO COMFORT 3005, Setup & User Manual

Page: 16 / 21

English
Troubleshooting
Check that the telephone cord is undamaged and properly plugged in. Disconnect any
additional equipment, extension cords and other phones. If the problem is resolved, the fault
is with some other equipment.
Test the equipment on a known working line (e.g. at a neighbour’s house). If the equipment
works there the fault is probably with your telephone line. Please inform your network operator.
The answering machine does not respond to remote access
•
Check that you are using a tone dial telephone.
•
Try holding the keys down longer, approximately 1 second per digit.
The answering machine is not answering
•
Memory may be full. Delete old messages.
•
Check that the adapter/phone cord is connected correctly.
•
Check that the answering machine function is turned on.
If the telephone still does not work, please contact the place of purchase for service. Don’t
forget the receipt or a copy of the invoice.
Care and Maintenance
CAUTION
Only use batteries, mains adapter and accessories that have been approved for use with this
particular model. Connecting other accessories may be dangerous and may invalidate the
phone's type approval and guarantee. The mains adapter is the disconnect device between
the product and mains power. The mains socket outlet must be close to the equipment and
easily accessible.
Your unit is a technically advanced product and should be treated with the greatest care.
Negligence may void the warranty.
•
Protect the unit from moisture. Rain/snowfall, moisture and all types of liquid can
contain substances that corrode the electronic circuits. If the unit gets wet, you should
remove the battery and allow the unit to dry completely before you replace it.
•
Do not use or keep the unit in dusty, dirty environments. The unit’s moving parts and
electronic components can be damaged.
•
Do not keep the unit in warm places. High temperatures can reduce the lifespan for
electronic equipment, damage batteries and distort or melt certain plastics.
•
Do not keep the unit in cold places. When the unit warms up to normal temperature,
condensation can form on the inside which can damage the electronic circuits.
•
Do not try to open the unit in any other way than that which is indicated here.
•
Do not drop the unit. Do not knock or shake it either. If it is treated roughly the circuits
and precision mechanics can be broken.
•
Do not use strong chemicals to clean the unit.
The advice above applies to the unit, battery and other accessories. If the unit is not working
as it should, please contact the place of purchase for service. Don’t forget the receipt or a
copy of the invoice.
12