LiGo DORO COMFORT 3005, Setup & User Manual

Page: 13 / 21

English
Delete incoming message
If you want to delete a single incoming message press
c
while the message is playing.
To erase all messages after playback, press and hold
c
until unit beeps.
Note!
New messages cannot be deleted until they have been played.
With PRIVACY MODE activated you need to enter the PIN CODE (default=0000) and then
press
0
.
Call monitoring
Incoming messages can be heard through the loudspeaker as they are received. If there is
no sound, adjust the volume using
v
/
V
.
Note!
With PRIVACY MODE activated Call Monitoring will be disabled.
MEMO (personal message)
A personal message – MEMO – is a message recorded directly onto the answering machine
(120 seconds maximum) without dialling. This means that the answering machine may be
used as an electronic notebook, where messages, reminders or other notes to family members
or colleagues can be recorded.
1. Press and hold the
a
-key. You will hear a beep.
2. Start speaking clearly towards the machine to record your message. This function only
works when the handset is on the base (on-hook).
3. Release
a
to stop recording.
4. Memos are played back in the same way as regular incoming messages.
Note!
With PRIVACY MODE activated you need to enter the PIN CODE (default=0000) and then press
0
. The answering machine will then play the recorded MEMO(s).
Two-way recording
You can record phone conversations as they occur. There is approximately 40 minutes
available recording time in memory, with the answering machine handling two-way recordings
as a regular incoming call.
1. A call is connected.
2. Press
a
.
2WAY RECORDING
is displayed and
a
, indicating that two-way
recording is in progress.
3. Press to terminate recording.
Remote control
The answering machine can be remotely accessed using an ordinary tone dialling phone.
1. Call the answering machine (the number that your answering machine is connected
to, usually your home number).
2. Enter the PIN code (default code is 0000) when the outgoing message is played.
3. Select remote access command(s):
9