SETUP:
Pairing with handheld remote transmitters
The dimmers can pair with up to 6 different remote
transmitters at any one time as each has a maximum
of 6 memories.
Pairing using LEARNING MODE (each dimmer
module treated separately):
1. On the dimmer switches press and hold down both
the ‘ON’ AND ‘OFF’ buttons until the blue and amber
LEDs flash alternately. The dimmer switch is now in
learning mode.
2. Using a LightwaveRF Connect Remote press the
‘ON’ button intended to be paired; the blue light on
the dimmer switch will flash to confirm that the
remote is now paired.
NOTE: Learning Mode lasts for 6 seconds; if no signal
is received from a remote handset during this time
then the dimmer will automatically exit learning
mode without pairing the device.
If, when expecting a blue LED flash to confirm
pairing, an amber LED flash is received instead, the
dimmer switch memory is FULL and no further
remotes may be paired with it unless one of the
existing remotes is first unpaired (see below).
!
Summary of Contents for connect JSJS LW240
Page 4: ......
