NOTE: If the ‘ON’ button is not released, the light level
will increase until it stops at the maximum possible
level of brightness.
If after setting a dim level the light is then switched
off, the next time the light is switched on the light
level will automatically return to the previous setting.
Dimming control with a LightwaveRF Connect
Remote
Dimming down
1. Make sure the light is switched on.
2. Hold down the ‘OFF’ button on the remote.
3. After 1 sec. the light will start to dim down.
4. At the desired brightness level release the ‘OFF’
button.
NOTE: If the ‘OFF’ button is not released, the light will
continue to dim until it reaches its lowest possible
level (without being turned off) and stop.
Raising Dim Level
1. Make sure the light is switched on.
2. Hold down the ‘ON’ button on the remote.
3. After 1 second the light will start to become
brighter.
4. At the desired brightness release the ‘ON’ button.
NOTE: If the ‘ON’ button is not released, the light level
will increase until it stops at the maximum possible
level of brightness.
Summary of Contents for connect JSJS LW240
Page 4: ......
