Unpairing Remotes and clearing the Dimmer
memory
Removing single Device:
1. On the relevant dimmer switch press and hold
down both the ‘ON’ and ‘OFF’ buttons until the blue
and amber LEDs flash alternately. The dimmer switch
is now in learning mode.
2. Using a LightwaveRF Connect Remote press the
‘OFF’ button intended to be un-paired; the amber
light on the dimmer switch will flash to confirm that
the remote is now unpaired.
Clearing Memory (will remove all paired remotes):
1. On the relevant dimmer switch press and hold
down both the ‘ON’ and ‘OFF’ buttons until the blue
and amber LEDs flash alternately. The dimmer switch
is now in learning mode.
2. On the dimmer switch press and hold down the
‘OFF’ button again until the blue and amber LEDs
flash simultaneously, then press (don’t hold) the ‘OFF’
button a further time; the amber LED will flash to
confirm that the memory has been cleared.
Summary of Contents for connect JSJS LW240
Page 4: ......
