Page 62 / 107
Section 9. Software control
– Using the Lightware Matrix Controller
9.3.4. Output parameter settings
By clicking on the Video output label a dialog window appears showing the parameters
for the corresponding output.
Output properties
Mode
The ‘Mode’ can be set to Auto, DVI, HDMI 24bit, HDMI 30bit or HDMI 36bit. The ‘Auto’
option sets the signal mode regarding to the attached display device’s EDID and the
incoming signal.
HDCP
The ‘HDCP’ option sets the HDCP encryption on the output. The Auto setting applies
encryption when the incoming signal is encrypted. The Always setting forces encryption
on any incoming video signal.
General
Information about the signal and the connection status is shown here.
Info:
These fields are filled automatically by the device after the examination of the signal.
Display
Information retrieved from the connected display’s EDID is shown.
Info:
These fields are filled automatically by the device after the examination of the signal.
Supported audio formats
The connected display’s supported audio formats are shown based on the read EDID.
Autoselect settings
Video auto select
The video Autoselect settings are available in this drop-down menu. It can be:
NonPriority, First detect,
DVI-D priority or
HDMI priority.
For detailed description about video Autoselect please read chapter
6.6
on page
31
.
Summary of Contents for UMX-OPT-TX150R
Page 1: ...UMX OPT TX150R User s Manual ...
Page 2: ......
